VFD580 15KW 380V Variable speed drive with position control which can be used for spindle machine
1. Main features of VEIKONG VFD580
1. Support AC asynchronous and permanent magnet synchronous motor, servo motor, supports speed, torque and servo position control mode.
2. 15kw and above equipped with built-in DC reactor as standard.
3. 37kw and below equipped with built-in braking unit as standard, 45kw-90kw is optional, starting from 110kw is external.
4. 90kw and below equipped with brake circuit short-circuit protection function.
5. Support MODBUS-RTU, CAN-Open, ProfiNet. Stronger mode VFD586 supports EtherCat.
6. Support 6 kinds of PG card(Incremental PG card, rotary, sin-cos pg card, ABZ close loop pg card, UVW pg card and Tamagawa absolute pg card.
7. Standard motor temperature sensor interface, support PT100, PT1000, KTY84.
8. Support Spanish LCD keypad, it is easy to monitor and operator.
9. Support optional STO function
2. VFD580 Technical Speficiation:
| Item | Specification |
| Input | Input Voltage | 1 phase/3phase 220V:200V ~240V 3 phase 380V-480V:380V ~480V |
| Allowed Voltage fluctuation range | -15% ~ 10% |
| Input frequency | 50Hz / 60Hz ,fluctuation less than 5% |
| Input filter | SIZE C and above built-in DC reactor |
| Output | Output Voltage | 3phase :0 ~input voltage |
| Overload capacity | 150% rated output current for 60 seconds; 180% rated output current for 10 seconds; 200% rated output current for 2.0 seconds |
| Control | Control mode | V/f control Sensorless flux vector control without PG card(SVC ) Sensor speed flux vector control with PG card (VC) |
| Operating mode | Speed control, torque control (SVC and VC), position servo |
| Speed range | 1:100 (V/f ) 1:200 (SVC ) 1:1000 (VC ) |
| Speed control accuracy | ±0.5% (V/f ) ±0.2% (SVC ) ±0.01% (VC ) |
| Frequency range | Standard :0.00 ~600.00Hz High frequency :0.0 ~ 1200.0Hz(MT580),0.0 ~2500.0Hz(MT586) |
| Input frequency resolution | Digital setting: 0.01 Hz or 0.01% Analog setting: maximum frequency x 0.025% |
| Startup torque | 150%/0.5Hz (V/f ) 180%/0.25Hz (SVC ) 180%/0Hz (VC ) |
| Torque control accuracy | SVC: 8% within 5Hz, 5% above 5Hz VC: 3.0% |
| Frequency giving ramp | Support linear and S curve acceleration and deceleration; 4 groups of acceleration and deceleration time, setting range 0.00s ~ 60000s |
| Position control | Position command supports internal position, pulse position input, CANopen position command, EtherCAT position command (VFD586); supports position fully closed loop mode |
| DC bus voltage control | VdcMax Control: Limit the amount of power generated by the motor by adjusting the output frequency to avoid over-voltage trip; VdcMin control: Control the power consumption of the motor by adjusting the output frequency, to avoid jump undervoltage fault |
| Carrier frequency | 1kHz ~ 16kHz(Varies depending on the type) |
| Startup method | Direct start (can be superimposed DC brake); speed tracking start |
| Stop method | Deceleration stop (can be superimposed DC braking); free to stop |
| Featured functions | Built-in delay unit, comparator unit and logic unit, etc., two groups of motor parameter switching, software switching output phase sequence, spindle orientation, online identification of motor parameters |
3. The introduction of our company Veikong
Shenzhen Veikong Electric CO.,Ltd. a high-tech enterprise which has been specializing in researching, manufacturing and trading high, medium and low voltage inverter, providing our clients with integrated system solutions. We have professional R&D and devoted management team with more than 20 years' experience of theoretical research, product development and quality management.Veikong also is one of the first independent AC drives company in China. We adopt SPWM, sensorless vector control and vector and torque control technology in our VFD series inverters, which has reached the international advanced standard. The products can directly replace and be equivalent of Europe and the United States, Japan and other brands, providing customers with a powerful technical support. We have achieved popularity and qualification in VFD industry. Quality is the life of enterprise.
Veikong, your trusted supplier!
4. VFD580 product images
Product Tags:
|
|
VFD580 15KW 380V Variable Speed Drive With Position Control For Spindle Machine Images
|
